Sheffield Maker Day

On May the 9th of the November the Sheffield Hardware Hackers and Makers participated in the Maker Day at Sheffield Hallam University. In this event we had three 3D printers, one of which was the SHHM’s Mendel 90. We also had a large collection of small projects that members had made (including a Geiger counter). As well as one or two Raspberry Pi’s. On top of this we had some Arduino projects witch featured some RGB LEDs.

20131110-165618.jpg

The three 3D printers that we had on display in the picture above where (from left to right): A Reprap Huxley, a Reprap Prusa Mendel and a Mendel 90. The Mendel 90 was being driven by a Raspberry Pi. The Pi had Print Run installed on it, the open source software for driving 3D printers with. This allowed us to have full control over the printer just as you would if you where using a computer. The slicer settings still needed setting up on the Pi, but you can still take a look at the time laps below.

3D Print on Mendel 90

The printer was printing a small Android fridge magnet test piece.
This 3D printer being driven by the Raspberry Pi, called a “Mendel 90” was built at a event called “Festival Of The Mind” this took place over two days on a weekend where 5 of these printers where built.

The selection of projects that members had brought along to the maker day included: A Geiger counter, Arduino controlled egg incubator and Arduino controlled ambient lighting. All of these kits had been made from scratch by group members.
We also had another Raspberry Pi set up with Scratch on for people to play on and learn.

20131116-084416.jpg

The next group meet up will take place on the 25th of November at Access space. New members are always welcome! For more Information on meet up’s and the group you can visit our Forum
Or alternately you can follow us on Twitter @SHHMakers