On Friday October 23rd we took part in MAKE:SHIFT:DO. A creative open day run by the Craft Council. Also taking part at Portland Works was James Wallbank who was doing Laser Cutting tutorials.
We displayed a number of our ongoing projects and had a few interested parties. Photos below.
Portland Works was the only location in Sheffield to be taking part in MAKE:SHIFT:DO this year and 1 of only 4 locations in Yorkshire as a whole.
We hope to run a similar (if not much, much better) event next year.
A Tweet mentioning us from the Craft Council.
A number of projects running including a 3D printer and pirc running in the background.
A handful of our visitors.
3D Printing Examples
A poster advertising the day.
On december the 14th we had our monthly build day at Access Space. We had a large array of 3D printers and electronic projects
being worked on, some of the things that went on throughout the day include...
- 3D Printing parts to improve the hack space
- Laser Cutting
- Tinkering with electronics
3D Printing parts to improve the hack space
We have been hosting our meet-ups at Access Space for around 9 months now. From the start Access Space has very kindly given us a space in there Refab Lab for us to store and use our 3D Printers. We where asked to put forward suggestions for in ways witch we
could improve the hack space. We discussed with Access Space about making it an easier space to work in. We decided to create and print some coat hooks. We drew up some 3D coat hooks in Open SCAD, a free open source 3D CAD programme.
Once the object had been Compiled and Rendered it was exported as a STL file, it could then be sliced and printed. altogether we
printed four of the coat hooks, in total we had three printers on the Job. Including the small foldable, portable printer that
has been made by one of the group members (we will try any get picture).
This above is this is the finished product. The coat hooks where mounted on to a pice of wood witch was screwed on to a shelving
One of the 3D printers that was brought along to the build day was a SUMPOD Delta, this printers X,Y and Z axis sit on three
threaded rods. Some pieces where designed using Ink Scape (a 2D open source CAD programme) and laser cut. The pieces where to
mount the stepper motors on to the printer.
Among all of this we also had some people with Arduino's creating projects, including light synthesisers.
We would also like to thank Access Space for providing us with a work space and access to tools and machinery in there Refab Lab.
The next meet up will be held at Access Space on the on January the 27th.
You can keep in contact with us by following us on Twitter @SHHMakers or on our forum at: https://groups.google.com/forum/#!forum/sheffield-hardware-hackers
On May the 9th of the November the Sheffield Hardware Hackers and Makers participated in the Maker Day at Sheffield Hallam University. In this event we had three 3D printers, one of which was the SHHM’s Mendel 90. We also had a large collection of small projects that members had made (including a Geiger counter). As well as one or two Raspberry Pi’s. On top of this we had some Arduino projects witch featured some RGB LEDs.
The three 3D printers that we had on display in the picture above where (from left to right): A Reprap Huxley, a Reprap Prusa Mendel and a Mendel 90. The Mendel 90 was being driven by a Raspberry Pi. The Pi had Print Run installed on it, the open source software for driving 3D printers with. This allowed us to have full control over the printer just as you would if you where using a computer. The slicer settings still needed setting up on the Pi, but you can still take a look at the time laps below.
3D Print on Mendel 90
The printer was printing a small Android fridge magnet test piece.
This 3D printer being driven by the Raspberry Pi, called a “Mendel 90” was built at a event called “Festival Of The Mind” this took place over two days on a weekend where 5 of these printers where built.
The selection of projects that members had brought along to the maker day included: A Geiger counter, Arduino controlled egg incubator and Arduino controlled ambient lighting. All of these kits had been made from scratch by group members.
We also had another Raspberry Pi set up with Scratch on for people to play on and learn.
The next group meet up will take place on the 25th of November at Access space. New members are always welcome! For more Information on meet up’s and the group you can visit our Forum
Or alternately you can follow us on Twitter @SHHMakers